Unitech ms910 manual

Press the trigger for 1. Press the trigger for the scanner. The barcode must be Code 39 with no checksum 2. When back in range, the scanner will send all stored data back to the host.

Connect the scanner and the host with mini USB cable. Scan [Set Date] 2. Scan [1], [2], [0], [8], [0], [1] from page 83 3. Page 54 - 48 If you enable the CLSI format, this option inserts spaces in position 2, 7, 13 of the data string for use in library systems.

For the bar codes that lead with the 1 number, use UPC E 1 selection. Page 80 - 74 First, make sure the scanner is firmly connected to the host computer, when attached correctly, the scanner will emit one long beep. Page 94 Does keyboard port supply enough power? Most notebook computers do not supply enough power to the scanner. Are you set up for the right interface?

Or did you change the Keyboard cable to RS but forget to set the scanner interface to RS as well? Set the scanner to its default settings, then select the correct interface based upon the cable and input you are using. Care should be taken when choosing materials, especially color inks and papers.

Sometimes the combination of the label color and the color of the ink can, in effect, blind the scanner. Please charge the scanner for at least 2 hours until the LED indicator turns off. Page 16 Unitech electronics co. Page Chapter 4 User Preferences Locate the appropriate feature setting listed in the following pages. Set feature values by scanning single barcodes or short barcode sequences. Page 23 All characters in dumped strings are uppercase.

If you see lowercase characters in dumped strings, change them to uppercase. Page 24 Unitech electronics co. Page 26 Unitech electronics co. Page 42 Unitech electronics co. Page 43 Unitech electronics co. Please scan "Shift left Break" to resume barcode setting. Please scan "Ctrl left Break" to resume barcode setting. It can be found on the quick start guide or quick connection card.

Page 50 These instructions are for SPP mode. Step 4 refers to a pop up that your phone will prompt you with so that you can enter a 4 digit code.

When you see this pop up, enter , just like the instructions say in the print out. Related Posts. Black Friday Results December 8, Posted in: Profit Bandit. Any explanation of how to do step would be appreciated. Hi, So at that point, you should have your scanner connected and paired with your phone, right? Leave a Reply Cancel reply Your email address will not be published. Search The Blog. Subscribe to the sellerEngine Blog. Sign Up. Scanner Setting Barcode Symbologies 1D barcode Barcode Symbologies 2D barcode Adjusting Settings Checking the Main and Backup Battery Status Extending Battery Life Changing the Automatic Power Settings Adjusting Backlight Setting Viewing Flash Memory Files Performing a hardware reset Performing a Warm Boot Performing a Cold Boot Your PA was designed for users who need a compact and durable PDA for data collection and real time transactions.

It provides users with a standard Windows-based environment for customizing and operating the device. Copyright unitech Electronics Co. After opening the box, ensure the following accessories for the PA are present:. Keypad interface for controlling the PA See Keypads. This section explains how to install and charge the battery, how to check battery status, how to turn on the PA, and how to calibrate the screen. There is a risk of fire and burns if the battery pack is handled improperly.

DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of used batteries according to local recycling guidelines in your area.

A backup battery cell is embedded into your device to prevent data loss in instances when the removable battery pack is removed or completely discharged. The backup battery will keep the data and system setting for up to 6 hours if the main battery is removed. NOTE: To enable the internal battery cell to provide backup power supply, charge your device with the main battery pack for at least 16 hours. Open the battery compartment by pushing the latch in the direction of the arrow and lifting up.

NOTE: The plastic battery tab makes it easy to remove the battery. Position the battery pack, making sure the battery contacts are aligned with the contacts in the compartment and the battery is placed on top of the plastic tab, as shown in the following illustration. Slide the battery pack into the battery bay while simultaneously pulling the battery hook until the battery clicks into place.

Before using the PA for the first time, you need to charge it for about 16 hours. After that, you can charge the PA 4 hours to recharge the battery to full capacity. Operating the PA for the first time without the AC adapter, and without fully charging the backup battery may result in loss of data stored in RAM memory. When the main battery is removed, the backup battery retains RAM data in memory for 6 hours, please charge the battery for the period to avoid the data loss in RAM memory.

NOTE: Data you entered may not be properly stored until the built-in backup battery has been adequately charged. Connect the AC adapter into an electrical outlet 3. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox.