Wifi no signal downstairs

If you are concern about your privacy or looking for the fastest DNS server for your location, then you should read this article where I tell you more about finding the fastest DNS servers. And you still have only one device in the network that has the WiFi connected but no Internet error? When your device connects to a network it will request an IP Address from the local router. First we are going to check if your network adapter is configured correctly to receive the IP Address from the router.

To reset your network you can try to simply reboot your device. After you reboot your computer you should be able to connect to the internet again. Another common problem is an outdated driver. Windows 10 gets updated regularly and sometimes the drivers of your computer are outdated to communicate with Windows. If you see an exclamation mark in the device management list then there is definitely a driver issue.

Windows 10 comes with a fast startup mode that is turned on by default. This way the computer can boot faster, but it also can cause some issues, like network settings that are not renewed. While IPv6 works for most devices, it can also cause network problems.

You can safely turn IPv6 off in your home network because all devices support the older IPv4 protocol. The best place to turn it off is your router. Almost every laptop and mobile phone these days supports both 2. The latter is faster but has a shorter range. When possible devices will always try to use the 5Ghz wireless networks. Sometimes the WiFi Connected but no Internet error comes to a problem with the 5Ghz network, maybe a broken antenna, or a bug in the driver or access point.

If this works, you can try to set the Then you still can use the faster 5Ghz bandwidth, but only with a slower protocol. To further fix the issue you should test if another device can connect over the 5Ghz.

If not, then there is a problem with your access point, try updating the firmware. If your laptop is the only device with the problem, then try updating the driver.

Some security software can be the problem of internet connection errors. They block outgoing network traffic due to a fault or configuration error. The fast option to test if the anti-virus or security software is the problem is by disabling or removing it. Just make sure you restart your computer before you test it again.

Not only computers can have problems with the wireless network connection, but also mobile phones are sometimes unable to connect to the internet. To solve the WiFi has no Internet Access error on your phone we can try a couple of things. I assume you already restarted your phone and router, because these are the basic steps you always should do first. First, we are going to reset only the wireless network that is causing the problem on your phone.

By forgetting the wireless network and reconnecting to it we make sure that the network setting on the phone is renewed. When we reset the network settings, then all the stored wireless network password on your phone are lost.

So make sure that your phone is the only device that is having issues with the network. Setting a fixed DNS server can solve this.

The easiest option is to install the free app from Cloudflare which will change your DNS server to 1. If you have more than one device that has its wifi connected but no internet access then we have to look at your router or access point for the problem.

The question we need to ask is if it has worked or not. But what if you have connected a new access point? This happens because of a configuration error in your access point. The access point extends your network wireless, but your router is still in control of the assigned IP Addresses in your network.

So the first thing you need to check is if you have disabled DHCP in your access point. The router will assign an Ip address to the wireless connected clients. When both devices are running DHCP you could end up with Ip conflicts two devices using the same Ip address or the access point may give the wrong information wrong Ip range, gateway address, or DNS servers.

Also, make sure that the access point has an Ip address in the range of the router. If you want to know more about setting up your home network, you can check this article with the best practices for your home network. If no one can connect to the internet then you will have to look for the problem in the router or access point. First, try to reboot the router or access point. Make sure your turn it off for at least 30 sec.

This way all caches will reset resulting in a fresh start. Give your device a couple of minutes to start up and try it again. Remember, if you factory reset the router or access point all configuration items can be lost. So make sure you have a backup of the configuration or have written down the most important information. Wireless network repeaters seem like useful devices, just plug them in and they can extend your wireless network.

But they are truly terrible when it comes to network stability and performance. If you are connected to a wireless network of a repeater and you get the error WiFi connected but no Internet , then most likely the network connection between the repeater and your router is lost.

Try to reset your repeater, or move the base station closer to your router. Your device is connected to your local network, but is unable to reach internet. Flush your DNS and restart your router. You can safely pull out to power cable of your router to restart it. Wait 10 seconds before you plug it back in. I hope you were able to solve the WiFi connected but no Internet error on your Windows 10 computer, Android device, or iPhone with the tips in this article.

If you have any questions, then just drop a comment below. This was helpful and clear. I especially liked that it gave options if all devices were having issues or just one. In this case it was just my phone and after I cleared DNS cache and restarted my phone, the problem was solved.

Thank you! It was on an old Windows XP alternative laptop that I use sparingly, so now I can use it a few more times as required. Thanks a lot for the well-written article.

I have wifi connected no internet problem for the past 2 months Oppo F11 pro I did all sort of things to get wifi. What is the solution for it. You are a life saver. It worked for me. I changed the DNS name to the one you received and finally I was able to connect my laptop. Everyone else was connected and my phone has internet except my laptop. I tired so many other options from other sites.

See the video below for an excellent 2 minute demonstration of how Wi-Fi range extender models work. They work best when installed in direct line of sight of the router. Here are two popular Range Extenders models click affiliate links below to view products on Amazon :. Netgear Wi-Fi Range Extender EX — Cheaper lower end extender model, but still has decent average review scores from plenty of ratings. Easy setup, small discrete white plug design, and generally reported to have decent range.

Also has an ethernet port to connect up a wired device if needed. More towards the pricey end though for single plug Range Extenders. Range Extenders are the simplest of the home networking solutions for weak Wi-Fi. If you are wanting a more advanced solution, then a powerline adapter is one step up from a range extender or Wi-Fi Booster. Powerline adapters consist of two adapter plugs instead of one, and are good for bypassing Wi-Fi altogether and creating a wired connection upstairs instead.

You plug one adapter in and connect it to your router, you plug the other adapter in and connect it to your device. The two plugs then communicate through the electrical wiring of the house to deliver a wired internet connection to your device, effectively turning your wall socket into an internet connection.

They are a clever and under-utilized home networking solution that can very effectively deliver a strong internet connection upstairs, or to any other part of the house further away from the router, where the Wi-Fi signal may be weak and inconsistent. See our page on powerline adapters for more models.

The fact that powerline adapters deliver a wired connection can give them some clear advantages over Wi-Fi Range Extenders in some cases. There are many reasons why your TV is saying no signal, which can be because of the TV or the satellite bringing the movement.

Whichever it is, when this happens, there are three likely reasons which we shall be provided as well as how to fix each. Most TV manufacturers have an auto-connection mechanism that allows the device to be detected and displayed on the screen as soon as you turn on the remote. You can first try to power off TV, wait for a few minutes and restart. This issue, if the incorrect source or Input, is likely to happen when it is only just one TV that is showing the no signal message. If this is so, fixing it simple and direct.

To effect this cable or Satellite reset, you have to follow steps below. If, after resetting your Cable or satellite, you still have the no signal message displaying on your TV, then you have to check maybe there is a wrong connection somewhere.