27lcdb03b service manual

Document preview [1st page]. No preview item for this file. Possible causes: No preview picture generated yet. It is not a pdf file. Please tick the box below to get download link:. For this no need registration. Please take a look at the below related repair forum topics. May be help you to repair. If you are not familiar with electronics, do not attempt to repair! You could suffer a fatal electrical shock!

Instead, contact your nearest service center! Translate this page:. This will prevent damage to the equipment due to lightning and power-line surges.

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can collide with such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the product.

Please read and follow the safety tips listed below to ensure the equipment is free from damage, and to ensure that no injury will occur as a result of improper use. Should the power cord become damaged in any way, please contact your dealer for a replacement cord.

If any problems arise with the unit, please contact your dealer for service. Removing the covers will void the warranty. If the plug is damaged or the wall socket plate is loose, they should not be used. Do not handle the power cord plug with wet hands.

Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not the cable. Doing so may cause damage to the power cable, which can cause fire or electric shock. If damage to the cable is suspected, have it repaired at an Authorized Service Center. If a problem occurs such as no picture or no sound , or if smoke or an abnormal odor is detected from the LCD TV, unplug the power cord immediately.

Have the Display evaluated at an Authorized Service Center. Services to the Display by any unauthorized personnel are strongly discouraged due to its dangerous high voltage nature. If water or foreign objects get inside the TV, if the TV is dropped, or if the cabinet becomes damaged, disconnect the power cord plug immediately.

Contact an Authorized Service Center for any repairs that need to be made. To turn off the main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.

Doing so will void the warranty! This TV is extremely easy to use and features high performance picture quality. The LCD TV is extremely versatile; it can be mounted on a wall or table stand, and it can be used in any ambient light environment. This manual will explain how to use your LCD TV, as well as its features, benefits and other important information. Please be sure to read this manual before installing or operating your LCD TV, especially the safety precautions! Use the remote control by pointing it towards the remote sensor window of the set.

Objects between the remote control and sensor window may prevent proper operation. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. The heat may cause deformation of the unit. In such a case, change the angle of the lighting or LCD TV set, or operate the remote control closer to the remote sensor window.

If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control. Be sure to follow the instructions below. Do not mix batteries of different types.

Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth. Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the remote control and the channel set-up procedure. Connect the female plug to AC power input of the set.

Connect the male plug to the wall outlet as illustrated. This plug contains safety components and must not be replaced by one sold by general retailers. It is fitted with a fuse that. If your set has stopped working, the fuse may have blown. Connect the outside aeri al or cable network to the socket at the back of the TV set. We recommend that you do not connect other equipment video recorder, satellite receiver, etc. Connect them when you have finished setting up the channels by referring to page 21 of this manual.

Then go to page 11 for information on the initial set-up, or to page13 for information on manual set-up if the channels. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Technicolor - Thomson. This is a safety feature. Use only the mounting hardware recommended by the manufacturer.

Do not place any objects on top of the TV. Do not cover the ventilation holes. Securely insert the power cord plug as far as it will go. If damage to the cable is suspected, have it repaired at an Authorized Service Center If the LCD TV is not in use for a long period of time, unplug the power cord from the wall outlet.

If problems occur during use If a problem occurs such as no picture or no sound , or if smoke or an abnormal odor is detected from the LCD TV, unplug the power cord immediately.

Electric shocks can result if this is not done. Clean the power cable regularly to prevent it from becoming dusty. Unplug the cord from the wall outlet and clean it with a dry cloth. Objects between the remote control and sensor window may prevent proper operation Cautions regarding use of remote control z Do not expose the remote control to shock. Open the battery cover. Insert batteries size-AAA batteries, Replace the cover and slide in reverse supplied with product. Slide the cover while pressing Place the batteries with their down.

Equipment for the UK is supplied with a mains cable fitted with a moulded plug. It is fitted with a fuse that protects your television. You will find a description of how to use the remote control on page 9. Then go to page 11 for information on the initial set-up, or to page13 for information on manual set-up if the channels have already been set up on your TV.

You can only view or download manuals with. Sign Up and get 5 for free. Upload your files to the site. You get 1 for each file you add.